User guide
Table Of Contents
- 1 Security recommendations
- 2 CERTIFICATE OF CONFORMITY
- 3 Products identification
- 4 Data-sheet
- 5 Product overview
- 1 Dimensions
- 2 Connectors
- 3 Led indicators
- 4 DIP switches
- 5 Factory default push-button
- 6 Mounting the product on a DIN rail or removing it
- 7 Cooling
- 8 RS232 interface
- 9 RS485 interface
- 10 Digital input and output
- 11 Connecting the antenna
- 12 Installing the SIM card
- Set up steps
- 2 Connecting a PC to the router for configuration
- 3 Rebooting the router after parameters changes
- 4 Recovering the factory LAN IP address
- 5 Recovering the factory configuration
- 6 Restricting access to the administration server
- 7 Recovering a free access to the administration server
- 8 Factory configuration
- 9 LAN interface set up
- 10 UMTS – GSM-GPRS-3GDGE interface set up
- 11 Setting up the DynDNS service
- 12 Creating VPN connections between routers
- 13 Routing functions
- 14 Address and port translation
- 15 VRRP redundancy
- 16 Remote users connections service
- 17 Remote users connections
- 18 M2Me_Connect service
- 19 Users list
- 20 Firewall
- 21 Serial to IP gateway
- 22 USB to IP gateway
- 23 Advanced functions
- 1 Diagnostic menu
- 2 Saving the configuration to a file
- 3 Updating the firmware
- Signets Word
SET UP
UMTS GPRS EDGE router ref. RAS-3G User guide ref. 9020009-01 Page 57
16 Remote users connections service
The RAS-3G provides a full remote user connection function called RAS :
• The remote user authenticates using the login, password and eventually a certificate; the router
accepts the connection only if the remote user belongs to the user list.
• Individual access rights are automatically allocated to the remote user.
• An IP address belonging to the LAN network is automatically assigned to the remote PC.
• Data are encrypted (TLS and L2TP / IPSec only).
• The connection is logged.
• Moreover, the RAS-3G is compatible with the M2Me_Connect service when setting a direct
connection is not possible.
To setup the remote user connection service, the following steps must be carried out :
• Step 1 :
Configure a PPTP or TLS or L2TP connection
or select the M2Me_Connect service configuration
menu.
• Step 2 :
Complete the user list
• Step 3 ::
Define the firewall rules
to limit the rights of the remote users