User guide
Table Of Contents
- 1 Security recommendations
- 2 CERTIFICATE OF CONFORMITY
- 3 Products identification
- 4 Data-sheet
- 5 Product overview
- 1 Dimensions
- 2 Connectors
- 3 Led indicators
- 4 DIP switches
- 5 Factory default push-button
- 6 Mounting the product on a DIN rail or removing it
- 7 Cooling
- 8 RS232 interface
- 9 RS485 interface
- 10 Digital input and output
- 11 Connecting the antenna
- 12 Installing the SIM card
- Set up steps
- 2 Connecting a PC to the router for configuration
- 3 Rebooting the router after parameters changes
- 4 Recovering the factory LAN IP address
- 5 Recovering the factory configuration
- 6 Restricting access to the administration server
- 7 Recovering a free access to the administration server
- 8 Factory configuration
- 9 LAN interface set up
- 10 UMTS – GSM-GPRS-3GDGE interface set up
- 11 Setting up the DynDNS service
- 12 Creating VPN connections between routers
- 13 Routing functions
- 14 Address and port translation
- 15 VRRP redundancy
- 16 Remote users connections service
- 17 Remote users connections
- 18 M2Me_Connect service
- 19 Users list
- 20 Firewall
- 21 Serial to IP gateway
- 22 USB to IP gateway
- 23 Advanced functions
- 1 Diagnostic menu
- 2 Saving the configuration to a file
- 3 Updating the firmware
- Signets Word
SET UP
Page 42 User guide ref 9020009-01 UMTS GPRS EDGE router ref. RAS-3G
“Use a specific key for this connection” parameter :
If that option is not selected, the preshared key entered in the VPN configuration screen will be used
by the router.
If that option is selected, enter the specific key.
“My WAN address
& Remote WAN address” parameters :
Enter the WAN IP address of the router and the WAN IP address of the remote router.
Attention : For ETIC certificates, this field is the Email field
• Certificate
“My subjectAlt name”
& “Remote subjectAlt name” parameters :
Paste the field "SubjectAltName" of the active certificate of the router you are configuring and the one
the remote router.
Attention : For certificates delivered by ETIC TELECOM, this field is the Email field.