User guide
Table Of Contents
- 1 Security recommendations
- 2 CERTIFICATE OF CONFORMITY
- 3 Products identification
- 4 Data-sheet
- 5 Product overview
- 1 Dimensions
- 2 Connectors
- 3 Led indicators
- 4 DIP switches
- 5 Factory default push-button
- 6 Mounting the product on a DIN rail or removing it
- 7 Cooling
- 8 RS232 interface
- 9 RS485 interface
- 10 Digital input and output
- 11 Connecting the antenna
- 12 Installing the SIM card
- Set up steps
- 2 Connecting a PC to the router for configuration
- 3 Rebooting the router after parameters changes
- 4 Recovering the factory LAN IP address
- 5 Recovering the factory configuration
- 6 Restricting access to the administration server
- 7 Recovering a free access to the administration server
- 8 Factory configuration
- 9 LAN interface set up
- 10 UMTS – GSM-GPRS-3GDGE interface set up
- 11 Setting up the DynDNS service
- 12 Creating VPN connections between routers
- 13 Routing functions
- 14 Address and port translation
- 15 VRRP redundancy
- 16 Remote users connections service
- 17 Remote users connections
- 18 M2Me_Connect service
- 19 Users list
- 20 Firewall
- 21 Serial to IP gateway
- 22 USB to IP gateway
- 23 Advanced functions
- 1 Diagnostic menu
- 2 Saving the configuration to a file
- 3 Updating the firmware
- Signets Word
SET UP
12.2.3 Configuring an ingoing IPSec connection .3 Configuring an ingoing IPSec connection
VPN
INTERNET
3G
LAN IP
addr.
Ingoing
connection
WAN IP
addr.
Remote WAN
IP address
Remote LAN
IP address
Router Remote router
IP network
GPRS
To set an ingoing VPN connection, To set an ingoing VPN connection,
• Come back to the “VPN connections” screen, • Come back to the “VPN connections” screen,
• Click the “add a connection” button.
• Click the “add a connection” button.
Give a name to the connection and select the “ingoing” connection direction option.
“Remote WAN IP address” parameter
:
Enter the IP network address and netmask assigned to the remote router over its WAN interface.
“Remote LAN address” & “Remote LAN netmask” parameters
:
Enter the IP network address and netmask assigned to the remote LAN.
• Preshared key
If the key used by the connection is the general PSK entered in the VPN menu, no additional
parameter has to be entered.
If a particular PSK must be used, carry out the configuration of the connection as explained below.
UMTS GPRS EDGE router ref. RAS-3G User guide ref. 9020009-01
Page 41