User guide
Table Of Contents
- 1 Security recommendations
- 2 CERTIFICATE OF CONFORMITY
- 3 Products identification
- 4 Data-sheet
- 5 Product overview
- 1 Dimensions
- 2 Connectors
- 3 Led indicators
- 4 DIP switches
- 5 Factory default push-button
- 6 Mounting the product on a DIN rail or removing it
- 7 Cooling
- 8 RS232 interface
- 9 RS485 interface
- 10 Digital input and output
- 11 Connecting the antenna
- 12 Installing the SIM card
- Set up steps
- 2 Connecting a PC to the router for configuration
- 3 Rebooting the router after parameters changes
- 4 Recovering the factory LAN IP address
- 5 Recovering the factory configuration
- 6 Restricting access to the administration server
- 7 Recovering a free access to the administration server
- 8 Factory configuration
- 9 LAN interface set up
- 10 UMTS – GSM-GPRS-3GDGE interface set up
- 11 Setting up the DynDNS service
- 12 Creating VPN connections between routers
- 13 Routing functions
- 14 Address and port translation
- 15 VRRP redundancy
- 16 Remote users connections service
- 17 Remote users connections
- 18 M2Me_Connect service
- 19 Users list
- 20 Firewall
- 21 Serial to IP gateway
- 22 USB to IP gateway
- 23 Advanced functions
- 1 Diagnostic menu
- 2 Saving the configuration to a file
- 3 Updating the firmware
- Signets Word
SET UP
Page 34 User guide ref 9020009-01 UMTS GPRS EDGE router ref. RAS-3G
11 Setting up the DynDNS service
Remark :
The DynDNS service is free; but the dyndns domain name can be cancelled if it is not periodically
used.
The DynDNS service cannot be used to reach the antenna of the RAS-3G router if the IP address
assigned to the RAS-3G router is not a public IP address.
If the IP address assigned to the antenna of the router on the 3G network is public but not
fixed, it is possible to use the DynDNS service to set a connection from a device connected to the
internet towards a device connected to the RAS-3G router.
To enable the DynDNS service proceed as follows :
• Reserve a dynDNS domain name on the dyndns.org web site.
For instance mymachine.dyndns.org.
• Select the« Set up » menu, and then WAN interface, and then “dynamic IP address” .
« Enable» checkbox :
Select that checkbox.
«
DNS account login” parameter :
Enter the login assigned by dyndns.
«
DNS account password” parameter :
Enter the password assigned by dyndns.
«
Hostname» parameter :
Enter the DynDNS domain name (for instance mymachine.dyndns.org).
• When you wish to set a connection toward the RAS-3G (PPTP, TLS, VPN …), enter the DynDNS
host name instead of the antenna IP address of the RAS-3G router.