User guide
Table Of Contents
- 1 Security recommendations
- 2 CERTIFICATE OF CONFORMITY
- 3 Products identification
- 4 Data-sheet
- 5 Product overview
- 1 Dimensions
- 2 Connectors
- 3 Led indicators
- 4 DIP switches
- 5 Factory default push-button
- 6 Mounting the product on a DIN rail or removing it
- 7 Cooling
- 8 RS232 interface
- 9 RS485 interface
- 10 Digital input and output
- 11 Connecting the antenna
- 12 Installing the SIM card
- Set up steps
- 2 Connecting a PC to the router for configuration
- 3 Rebooting the router after parameters changes
- 4 Recovering the factory LAN IP address
- 5 Recovering the factory configuration
- 6 Restricting access to the administration server
- 7 Recovering a free access to the administration server
- 8 Factory configuration
- 9 LAN interface set up
- 10 UMTS – GSM-GPRS-3GDGE interface set up
- 11 Setting up the DynDNS service
- 12 Creating VPN connections between routers
- 13 Routing functions
- 14 Address and port translation
- 15 VRRP redundancy
- 16 Remote users connections service
- 17 Remote users connections
- 18 M2Me_Connect service
- 19 Users list
- 20 Firewall
- 21 Serial to IP gateway
- 22 USB to IP gateway
- 23 Advanced functions
- 1 Diagnostic menu
- 2 Saving the configuration to a file
- 3 Updating the firmware
- Signets Word
SET UP
2.3 Modifying the configuration from the LAN
• If the IP @ of the RAS-3G on the LAN interface is fixed
Step 1 : Ensure the DIP switch SW1 and SW2 are OFF to select the stored IP @.
Step 2 : Launch the html browser and enter the IP address assigned to the router.
Or, launch the ETICFINDER utility to detect the RAS-3G address.
Remark :
If the home page cannot be displayed, refer below.
• If the IP @ of the RAS-3G on the LAN interface is assigned by a DHCP server
Step 1 : Ensure the DIP switch SW1 is OFF and SW2 ON to select DHCP client operation.
Step 2 : Launch ETIC FINDER to detect the RAS-3G address over the LAN interface.
Click the product once detected.
The Home page of the administration server is displayed.
Remark :
If the home page cannot be displayed, refer below.
UMTS GPRS EDGE router ref. RAS-3G User guide ref. 9020009-01
Page 27