User guide
Table Of Contents
- 1 Security recommendations
- 2 CERTIFICATE OF CONFORMITY
- 3 Products identification
- 4 Data-sheet
- 5 Product overview
- 1 Dimensions
- 2 Connectors
- 3 Led indicators
- 4 DIP switches
- 5 Factory default push-button
- 6 Mounting the product on a DIN rail or removing it
- 7 Cooling
- 8 RS232 interface
- 9 RS485 interface
- 10 Digital input and output
- 11 Connecting the antenna
- 12 Installing the SIM card
- Set up steps
- 2 Connecting a PC to the router for configuration
- 3 Rebooting the router after parameters changes
- 4 Recovering the factory LAN IP address
- 5 Recovering the factory configuration
- 6 Restricting access to the administration server
- 7 Recovering a free access to the administration server
- 8 Factory configuration
- 9 LAN interface set up
- 10 UMTS – GSM-GPRS-3GDGE interface set up
- 11 Setting up the DynDNS service
- 12 Creating VPN connections between routers
- 13 Routing functions
- 14 Address and port translation
- 15 VRRP redundancy
- 16 Remote users connections service
- 17 Remote users connections
- 18 M2Me_Connect service
- 19 Users list
- 20 Firewall
- 21 Serial to IP gateway
- 22 USB to IP gateway
- 23 Advanced functions
- 1 Diagnostic menu
- 2 Saving the configuration to a file
- 3 Updating the firmware
- Signets Word
INSTALLATION
Page 18 User guide ref 9020009-01 UMTS GPRS EDGE router ref. RAS3G
8 positions screw terminal : Supply voltage and digital input / output
Position Name Description
1 Power
10 to 30 VDC
C
1 +
RAS-3G-1220 :
All other models : 10 to 60 VD
2 P ower
1 -
GND
3 Power
RAS-3G-1220 : 10 to 30 VDC
C
2 +
All other models : 10 to 60 VD
4 P ower
2 -
GND
5 3 V DC provided by the RAS router 3V3
6 In Digital input
7 F + Digital output + (max 50Vdc - 0,6A)
8 F - Digital output -
RJ45 connector : Ethernet
Position Name Description
1 Tx + Emission polarity +
2 Tx - Emission polarity -
3 Rx + Reception polarity +
4 N.C -
5 N.C -
6 Rx - Reception polarity -
7 N.C. -
8 N.C. -
RS485 screw terminal
Position Name Description
1 A RS485 polarity A
2 B RS485 polarity B
RS232 RJ45 connector port 1
(To connect to a DCE to the RS232 port)
Position Circuit n Functio
1 D OUT Data terminal ready TR - 108
2 TD - 103 OUT Data Emission
3 RD - 104 IN Data Reception
4 DSR - 107 IN Data set ready
5 SG - 102 - Ground
6 Not used OUT -
7 CTS - 106 IN Clear to send
8 RTS - 105 O d UT Request to sen