User manual

APPENDIX 1 : Html server overview
IPRS serial gateway User guide ref. 9018409-01
Page 47
1/ Setup menu
LAN interface To enter the IP @ of the serial gateway on the LAN interface.
To enter the IP @ assigned to the remote users
To set up the Ethernet interfaces
Security To set the firewall rules (User filter and main filter)
To add a certificate
To restrict access to the administration server
Alarm To set up alarm SNMP traps
To set up alarm emails
Serial gateway (1) To set up the modbus gateway (client / server)
To set up the RAW TCP gateway
To set up the RAW UDP gateway
To set up the RAW UDP multicast gateway
To set up the TELNET gateway
USB gateway (2) To set up the USB gateway
System To set up SNMP parameters
To update time and date
2/ Diagnostic menu
Log To display the events ( VPN connections, user connections..)
Serial gateway To display the status of each gateway (COM1 and COM2)
Tools To send Pings from the serial gateway
Hardware To display the input status
To control the output
To display the DIP switches status
Environment To display the internal T° and the supply voltage
Advanced To store the internal report to a disk for diagnostic purposes
(1) IPRS-1220 or IPRS-1230
(2) IPRS-1201