User manual

MAINTENANCE
IPRS serial gateway User guide ref. 9018409-01 Page 45
3 Updating the firmware
Step 1 : Before starting, you need,
a PC with a Web browser and an Ethernet cable;
the FTP server software which can be downloaded from the « firmware page » of the ETIC
« download area » web server.
Step 2 : Download the release of the firmware from our download area to your PC
Step 3 : Prepare the PC
Check the Ip address of the PC is compatible with the one of the IPRS serial gateway.
Connect the IPRS serial gateway to the PC.
Launch the TFTP server (tftp32.exe) software and select the new release (L026xxx/img)
by using the "Browser" button.
Click on "Show dir" to check the files of the directory : rfsmini.tgz, rootfs.bin, u-boot.bin and
uImage.
Step 4 : Update the firmware
Launch the web browser
Enter the IP address of the ETIC product ; the home page of the ETIC configuration server
is displayed.
Select the "System" menu and then " firmware Update". In the field "IP address of the
TFTP server", enter the IP address of your PC.
Note : The IP address of the PC is written in the field "Server Interface" in the TFTP server
windows.
Click "Save" and then "Update".
The first file should begin to be downloaded from the PC to the serial gateway.
During the operation, the led blinks
When the download is finished, the product automatically reboots.
To be sure the new release has been installed, go to "About" in the administration web
page of the IP product.
Step 5 : Restore the default configuration
• Select the “Maintenance” menu and then the “Save / restore” menu.
• Click the “Restore default configuration” button.