User manual

MAINTENANCE
IPRS serial gateway User guide ref. 9018409-01
Page 43
1 Diagnostic
The html server provides extended diagnostic functions.
Select the Diagnostic menu and then the appropriate sub-menu.
• Log sub-menu:
The log displays the last 300 dated events :
ADSL, VPN and users connections and disconnections,
power on,
Serial gateway events.
• Network status sub-menu and then status sub-menu :
That screen displays the current status of the LAN interfaces and of the
Internet connection :
• LAN interfaces :
That part of the page shows the data of the LAN interface :
MAC address,
Ethernet mode (10 /100, half or full),
IP address.
• Serial gateway :
That page displays the current status of the serial gateways :
Type of the gateway(Modbus, RAW, Telnet …),
serial port set-up (data rate etc…),
number of characters received or sent,
Number of TCP frames or UDP datagrams received or sent,
Number of TCP connections enabled.
The View link displays a window which shows the hexadecimal received
and transmitted traffic< over each serial COM port.
• Ping :
That screen enables to send a ping frame to an IP address.
• IO control
That screen displays the status of the digital input and output and allows
to set ON or OFF the alarm digital output.