User manual

CONFIGURATION
IPRS serial gateway User guide ref. 9018409-01 Page 41
13 Alarms
13.1 SNMP
The IPRS gateway is able to send snmp traps when alarms occur.
Activation checkbox
:
If that option is selected, the serial gateway will send an SNMP trap if an
alarm is detected.
SNMP network management IP address :
Enter the IP address of the management platform
SysName
& SysLocation :
That fields allow to identify the source device.
Example :
Sysname : etic
Syslocation : France
Product start-up checkbox
:
If that option is selected, the serial gateway will send an SNMP trap each
time it will connect to the Internet
13.2 Digital output alarm
If an alarm occurs, the serial gateway will open the digital output..
The causes which make the output to open cane be either the
ADSL disconnection, power input 1 failure, power input 2 failure.
13.3 E-mail alarm
When the digital input is closed or opened, an email can be transmitted to
one of the users of the users list.
To set that function select the “Alarm” menu and click “email”.
Enable the alarm email checkbox
:
Select this option if you want an email to be sent to a user when the digital input 1 is set
ON or OFF.