User manual

CONFIGURATION
Page 34 User guide ref. 9018409-01 IPRS serial gateway
11.4 RAW UDP gateway
11.4.1 Overview
The RAW UDP gateway can be assigned to the serial port 1 or to the
serial port 2 or to both.
if it is assigned to both serial ports, the UDP port numbers must be different.
The RAW UDP gateway enables you to connect together a group of
serial or IP devices through an IP network.
The group can include IP devices if they have the software pieces able to
receive or transmit serial data inside UDP.
Serial data transmitted by each device is transmitted to all other serial
devices through the IP network.
A table of IP destination gateways is stored in each IPRS gateway
belonging to the group.
The serial data is encapsulated in the UDP protocol.
The UDP frame is sent to each destination IP address stored in the table.