User manual

CONFIGURATION
IPRS serial gateway User guide ref. 9018409-01 Page 33
“Timeout of RS232/485 end of frame” parameter :
Set up the delay the gateway will wait before declaring complete a string
received from the asynchronous device.
Once declared complete, the gateway will transmit the string to the IP
network.
“TCP inactivity Timeout” parameter :
Set up the time the gateway will wait before disconnecting the TCP link if
no characters are detected.
“TCP port number” parameters :
Set up the port number the gateway has to use.
If the Raw TCP server gateway is assigned to both serial COM ports, the
TCP port numbers must be different on each port.