User manual

CONFIGURATION
IPRS serial gateway User guide ref. 9018409-01 Page 25
11 Serial to IP gateway
That function is available in IPRS-1220 or IPRS-1230
The IPRS-1220 or IPRS-1230 feature two serial asynchronous ports
RS232 or RS485 (see the product identification table
).
A particular serial gateway can be assigned to each port .
If the same type of gateway is assigned to both serial ports, the UDP or
TCP port numbers must be different.
The gateways listed below are provided :
Modbus client or server (i.e. master or slave) :
To connect several serial modbus slaves to several IP modbus clients.
Or to connect a serial modbus master to an IP modbus server.
RAW TCP server or client :
To connect 2 serial devices through an IP network.
Telnet :
To connect a Telnet terminal to the RAS.
RAW UDP :
To exchange serial data between several serial and IP devices, through
an IP network, using a table of IP addresses.
RAW multicast :
To exchange serial data between several serial and IP devices, through
an IP network, using a multicast IP address.
Unitelway slave :
To connect a serial unitelway master to an IP network.