User manual

CONFIGURATION
Page 20 User guide ref. 9018409-01 IPRS serial gateway
4 Modifying the configuration
• If the IP @ of the IPRS is assigned by a DHCP server
Step 1 : Ensure the DIP switch SW1 is OFF and SW2 ON to select DHCP
client operation.
Step 2 : Launch ETIC FINDER to detect the IPRS address over the
LAN interface.
Click the product once detected.
The Home page of the administration server is displayed.
Remark :
If the home page cannot be displayed, refer below.
• If the IP @ of the IPRS gateway is fixed
Step 1 : Ensure the DIP switch SW1 and SW2 are OFF to select the
stored IP @.
Step 2 : Launch the html browser and enter the IP address assigned to
the serial gateway.
Or, launch the ETICFINDER utility to detect the IPRS GATEWAY
address.
Remark :
If the home page cannot be displayed, refer below.