User manual

CONFIGURATION
Page 18 User guide ref. 9018409-01 IPRS serial gateway
Saving and restoring the parameters file (see the maintenance
chapter)
A parameters file can only be downloaded to a product having the same firmware version.
It is why, we advise to assign a name to a parameter file including the product name and
the software version like for instance “myfile_IPRS1220_V241.bin”.
3 First configuration
Step 1 : Check the DIP switches
Coming from factory,
the DIP switches SW1 and SW2 are set OFF to select the stored IP
address;
and the stored IP address is the factory IP address 192.168.0.128.
Step 2 : Create or modify the PC IP connection.
Assign to the PC an IP @ in accordance with the IPRS IP address.
For the first configuration, assign or instance 192.168.0.127 to the PC.
Step 3 : Connect the PC directly to the LAN interface of the IPRS
serial gateway using any Ethernet cable (straight or cross wired).
Step 4 : Launch the navigator
Enter the LAN IP @ of the serial gateway 192.168.0.128.
The Home page of the administration server is displayed