Specification

ETi Solid State Lighting
720 Northgate Parkway, Wheeling, IL 60090 | TEL: [phone]
E-mail: [e-mail] | ETiSSL.com
All specications are subject to change without notice.
All reported values are typical, measured under laboratory conditions @ 25
o
C (77
o
F).
Actual performance can vary slightly as a result of end-user application & environment.
MSFP Flat Panels | Oct. 11, 2023 | Page 1 of 4
Construction
Optics
Installation
Electrical
Certications & Test Data
Warranty
5-Year Standard Warranty. See terms at: ETiSSL.com/warranty/
DATE: PROJECT:
NOTES:TYPE:
CATALOG #:
KEY FEATURES
SPECIFICATIONS
CCT & Light Quality
Light Output & Efcacy
Dimming, Voltage, Controls
5
WARRANTY
YEAR
• 3 Selectable CCTs (3500K, 4000K, 5000K)
• 80+ CRI
Each back-lit luminaire is ultra thin with an overall height of 1.69” to t
shallow plenums and are IC rated for direct contact with insulation.
• Efcacy Rating Range @4000K:
2X4: 104 – 124 | 2X2: 107 – 119 | 1X4: 108 – 130
• 73% lumen maintenance @ 54,000 hours and
projected L70 @ > 60,000 hours.
• 0–10V dimming to 10%
• Universal voltage (120–277V)
• BBU Options Available
• Aluminum lens frame with mitered corners in a matte white nish
• Luminaire backplate is die formed steel and post painted
• Poly styrene lens material provides high light transmittance
• Frosted diffuser delivers even illumination and diminished glare
• Comes with guide clips to install into recessed grid
• Additional mounting kits available as accessories:
Surface mounting kit
0-3 ft cable suspension mounting kit
• 3 LUMEN BOOST
®
/ 3 CCT COLOR PREFERENCE
®
for easy
eld-adjustable lumen / CCT selection with switch located on
back panel. Factory set to highest wattage.
• > 60,000 hour LEDs at L70 for reduced maintenance
• Operates at 120–277V 50/60Hz
• 0–10V dimmable driver, down to 10%
• Internal Surge protection 2.5kV
• Operating temperature: -4°F to 104°F (-20°C to 40°C)
• Ships at the highest lumen output
• cUS ETL Rated
• Damp location, IP20
• Adheres to LM79, LM80, and TM21 industry standards for photometric,
lumen maintenance and lifetime calculations
• DLC
®
(DesignLights Consortium) Standard. Please refer to DLC for specic
product qualications at www.designlights.org (Search by part number,
example: MSFP-24-LB3-8-CP3-MV-LVD)
• IC Rated for direct contact with insulation
• Driver rated for FCC part 15 Class B for use in residential or commercial
applications
• 3 Selectable Wattages: 30W | 40W | 50W (2x4)
20W | 30W | 40W (2x2 and 1x4)
LM 79 LM 80 TM 21
IES
DAMP
LOCATION
KEY DATA
Lumen Range 2130 – 5502
Wattage Range 19 – 49
Efcacy Range (LPW) 104 – 130
Reported Life (Hours) L70 / >60,000
MSFP | MULTI-SELECT FLAT PANELS
3 LUMEN BOOST
®
& 3 CCT COLOR PREFERENCE
®
BACK-LIT | 0-10V Dimming | Efcacy 104 – 130 LPW
2X4
1X4
2X2
