Specification

ETi Solid State Lighting
720 Northgate Parkway, Wheeling, IL 60090 | TEL: [phone]
E-mail: [e-mail] | www.ETiSSL.com.com
All specications are subject to change without notice.
All reported values are nominal or typical values, measured under laboratory conditions @ 25
o
C (77
o
F).
Actual performance can vary slightly as a result of end-user application & environment.
ESS1005A | December 7th, 2020 | Page 5 of 6
WR Direct|Indirect Series
EZ Install Direct|Indirect Architectural Wrap Light
3,977 Direct Lumens | 2,725 Indirect Lumens | DLC | 5-yr Warranty
PRODUCT SPECIFICATIONS
Construction
Low-prole 3.0” tall, formed steel primary housing with a full-length internal center driver and wiring
compartment. Each die-cast aluminum housing end-cap includes a single 1/2” knockout for thru-wire
and continuous row installation. Additional (3) 1/2” knockouts located on top of housing for wire entry.
Self captive die-cast housing end caps can be removed without tools to access the main housing’s tool-
less latch and housing/lens hinge assembly. Hinge the primary housing to access and remove the tool-
less center driver and wiring compartment cover for added ease of installation. Specially engineered
thermal management helps to promote cooling and reduce operating temperatures to help maximize
the life of all electrical components. Fixture is designed for use in damp locations.
Electrical
UL recognized drivers are rated for 50,000 hours to deliver optimal performance over the extended
system life of the luminaire. Universal 120-277V with 0-10V dimming capability (dimming range of 100%
to 10%) for use with secondary controls by others. Drivers shall have a power factor greater than 0.90
and less than 20% total harmonic distortion. Drivers are rated for FCC part 15 Class B use in commercial
applications. 89.0% LED lumen maintenance at 60,000 hours (L89/60,000) per IES TM21. Projected L70 @
180,000 hours per IES TM21.
Optics & LED Platform
LEDs are surface mounted to (2) direct illumination and (2) indirect metal printed circuit boards (MCPCBs)
The direct LED arrays are coupled with a semi-diuse, 1.2mm thick secondary polymer lens. Diusing
lens provides a uniform and soft visual appearance when in direct view with minimal LED pixelation,
providing excellent visual comfort. The indirect LED arrays are coupled with an over optic to provide
general uplight ambient lighting. Easily switch between lighting modes (direct & indirect, indirect only or
direct only) by toggling a dedicated wall switch on & o within (3) seconds. Optical system generates an
extremely uniform, all-purpose up/down distribution. Available in 4000K CCT, with a minimum CRI of 80.
Compliance & Certification
All luminaires are cULus listed and are built for damp location use. Suitable for use in -20
o
C (-4
o
F) to 45
o
C (113
o
F) high ambient environments. Complies to FCC part 15 Class B. Adheres to LM79, LM80 and TM21
industry standards for performance and lifetime calculations. DesignLights Consortium® (DLC) Standard
qualied product. Always refer to DLC website at www.designlights.org/QPL to conrm specic product
congurations that are qualied.
Mounting & Installation
Luminaire is designed for easy direct surface mounting standard or via the included 20” suspension
mount cable system (all ceiling anchors & hardware supplied by others). Additional aircraft cable or suitable
suspension mounting systems can be used as required per application (supplied by others). Optional 8”
pendant|stem mount accessory kit also available (custom stem lengths by others). Each xture also includes
a continuous row bracket accessory that allows you to quickly connect multiple xtures end-to-end.
Up to (8) xtures can be thru-wire installed (jumper wires are included) as needed for added design and
installation exibility (max number of thru-wire xtures can be dependent on local electrical codes). The continuous
row bracket can be used with all (3) installation methods. Installer must ensure installation compatibility
in any application and overall compliance to all applicable local and national building and electrical codes.
Standard Available Control Options
Optional external end mounted microwave occupancy sensors are available. Factory sensor settings
can be changed using an optional handheld remote programmer accessory (15m|49.2’ max distance, see
instruction manual for details). Standard factory default settings: 100% high, 10% low, hold time @ 5-minutes
(no motion detected, dim to low), standby time @ 5-minutes (time after hold time w/ no motion detected
xture turns o), daylight sensor is disabled.
(Search rst 6-digits of the model # followed by ‘##’ on the DLC QPL...Ex. ‘565672##’ to view DLC qualied products)
Standard Available Emergency BBU Options
Optional remote/external emergency battery backup units are available in approximately 25-watts for
120-277V use to meet required life-safety requirements (50
o
C/122
o
F max ambient). The battery system
provides 90-minutes of continuous power to the LED system for code compliance. BBUs are certied
in CA Title 20 MAEDBS. Test switch/indicator light is located on the exterior housing of the round BBU
housing and via a remote test switch/indicator light for the rectangular BBU housing. Optional handheld
test remote available for round BBU SKU only. Multiply the lumens per watt of the specied SKU by the
BBU wattage for the approximate delivered lumens. (Ex. 120 LPW x 25-watts = approximately 3,000 lumens)
Warranty
The WR EZ Install Direct|Indirect Architectural Wrap series ships with ETi SSL’s 5-year standard warranty.
(Terms & Conditions apply)
Load Information
Power Factor > 0.90
THD < 20%
Frequency 50/60 Hz
Sound Rating < 20 Dba
Low Temp Start -20
o
C (-4
o
F)
Max Temp 45
o
C (113
o
F)
Unit Weight 7.8 lbs
Shipping Information
Unit Weight
1
Pallet
2
(51”l x 44”w x 57”h)
8.9 lbs 40 units per
Lumen Maintenance
Ambient
Temperature
TM-21 Lumen Maintenance
(60,000 hours)
25
o
C (77
o
F) > 89.00%
Ambient
Temperature
TM-21 Theoretical L70
(hours)
25
o
C (77
o
F) 180,000
1. Case pack weighs 20.9 lbs (2 units/case pack).
2. There are 20 case packs per pallet.