Specification

ETi Solid State Lighting
720 Northgate Parkway, Wheeling, IL 60090 | TEL: [phone]
E-mail: [e-mail] | www.ETiSSL.com.com
All specications are subject to change without notice.
All reported values are nominal or typical values, measured under laboratory conditions @ 25
o
C (77
o
F).
Actual performance can vary slightly as a result of end-user application & environment.
ESS1005A | December 7th, 2020 | Page 3 of 6
WR Direct|Indirect Series
EZ Install Direct|Indirect Architectural Wrap Light
3,977 Direct Lumens | 2,725 Indirect Lumens | DLC | 5-yr Warranty
MOUNTING DETAILS
1,2,3
ETi SSL’s WR EZ Install Direct|Indirect Architectural Wrap Light Series is designed to be easily installed using three dierent primary mounting
methods
(direct surface mount, suspension mount or pendant/stem mount). Each mounting method can be paired with the factory included ‘Continuous Row
Bracket’ for easy end-to-end installation
(thru-wire compatible) for additional architectural design and installation exibility.
Standard Direct Surface Mount
(appropriate surface anchors by others) Standard Suspension Mount
1
(factory included 20” cable|hardware, continuous row shown)
Optional 8” Pendant|Stem Mount
2
(must be ordered separately) Optional 8” Pendant|Stem Mount
2
(must be ordered separately, continuous row shown)
Notes:
1. Set of (2) 20” air craft style cable & hardware included w/ every xture (custom compatible cable lengths can be provided by others).
2. Pendant|Stem Mount accessory kit includes 8” threaded stem (custom compatible stem lengths can be provided by others).
3. Every xture comes w/ (1) continuous row bracket for end-to-end installation (use as needed w/ primary mounting options for added design exibility).
CONTINUOUS ROW MOUNTING DETAILS
1,2,3
Each ETi SSL’s WR EZ Install Direct|Indirect Architectural Wrap Light includes a ‘Continuous Row Bracket’ that allows you to quickly connect multiple
xtures end-to-end. This bracket can also be paired with all three primary mounting options (surfacet, suspension or pendant/stem mount) to create a
unique architectural layout and design installation. If desired, up to (8) xtures for a total of 32’ can be thru-wire installed (jumper wires are included).
Notes:
1. Every xture comes w/ (1) continuous row bracket for end-to-end installation (use as needed w/ primary mounting options for added design exibility).
2. Up to (8) xtures can be thru-wire installed (jumper wires are included).