Instructions / Assembly

4
1
Mounting to drywall
□ Drill two holes large enough to clear the closed flaps of
the butterfly nut on the toggle bolt (not included). Make
sure to fasten the toggle bolt into the butterfly nut before
inserting the flaps into the ceiling.
□ Tighten the toggle bolt.
Depending on the method chosen for mounting the fixture, mark two spots for the mounting hardware.
□ Mark two spots on the ceiling 35 in. apart for suspension mounting (hardware not included).
□ Mark two spots on the ceiling or wall 33-3/4 in. apart for surface mounting (hardware not included).
NOTE: Separate mounting hardware (not included) not shown to actual size.
2
Mounting to wood
□ Drill two 1/16 in. diameter holes in the ceiling to
accommodate hook screws (not included). Make sure to
fasten the combo wood-machine end into the metal hook.
□ Tighten the hook screw (not included) into the wood.
Installation
NOTE: Eye hooks can be used as an alternate method of attaching the fixture to the ceiling.
NOTE: If using eye hooks in the ceiling instead, two optional
S hooks (BB) are provided for hanging the fixture.
NOTE: If using eye hooks in the ceiling instead, two optional
S hooks (BB) are provided for hanging the fixture.
Suspension Mounting
OPTIONAL SURFACE MOUNTING
For mounting to drywall:
Mounting Screw x 3
Drywall Anchor x 3
SUSPENSION MOUNTING
For mounting to drywall:
Toggle bolt x 2
Part Description Quantity
Toggle Bolts Consisting of a No. 10-24 bolt 2-7/8 inches long with two
tapered wings 1 by 5/16 inch.
2
Studs Measuring 1-3/4 inches overall and having 1-1/4 inches of
wood screw threads on one end and at least six No. 10-24
machine screw threads on the other end.
2
Metal Hooks With a No. 10-24 threaded hole that engages the bolt
threads.
2
For mounting to wood:
Mounting Screw x 3
For mounting to wood:
Hook screw x 2