Instructions / Assembly

5 WWW.ETISSL.COM
Please contact 1-855-384-7754 for further assistance.
1
Installing safety suspension kits
□ Drill two holes in the ceiling by Phillips Screwdriver
(not included).
□ Mark hole location, distance betwen two holes 11.14 inch.
□
then insert the hanging kits (CC) (DD) (not include).
Suspended Mounting Installation (option)
AA
DD
DD
CC
2
Hanging the LED Panel with cable
□ Attach the Earthproof hooks to the bends at the edges.
Put the Screw (AA) (BB) anchors (not include) into holes,
□
CC
DD
Adjusting the hanging rope making the panel in a horizontal
state.
BB
BB
AA
NOTE:
DIM+/- and LED +/- can not contact together, otherwise it will damage the LED Driver.
3
Connecting the electrical wires
□ Unscrew the driver cover by Phillips Screwdriver (not included).
□ Connect the wires from the LED Driver as follows
- Connect L to live wire of junction box, connect N to neutral wire of junction box
□ Connect the yellow wire from the LED Driver to the grounding wire from the junction box.
□
If you use the dimmer, connect DIM- to “-” of dimmer, connect DIM+ to “+”.
L
GND
DIM-
DIM+
LED+
LED
N
20-16AWG
22-12AWG
22-12AWG
0-10V/PWM/RX Dim
LED Driver
ming
GND( )
AC100-277V/50-60Hz
Outlet hole
white
yellow
red
-
ETi SSL Inc. - The Americas Headquarters
720 Corporate Woods Parkway
Vernon Hills, IL 60061