INSIDE THIS INSTRUCTION MANUAL Important Safety Instructions / Specifications................................................................2 Set-up Information .......................................................................................................3 Panel Specifications .....................................................................................................4 Controls and Connections.............................................................................................
Setting Up Your LX-18A V2 Subwoofer The B-52 Pro Audio speakers described in this instruction manual are intended for portable used in which the speakers will be placed directly on the floor, stage or a solid platform. The LX-18A V2 and LX-18 V2 described in this manual should not be suspended or flown. These models are also not intended for fixed installations outdoors or in high-moisture areas. Moisture can damage the subwoofer and can cause corrosion of electrical contacts.
GETTING TO KNOW YOUR LX-18A V2 ACTIVE 18” SUBWOOFER PANEL CONTROLS 11) Level Control: Sets the volume of the subwoofer 12) Phase Switch: Sets the polarity of the LX-18A V2. 13) Power Indicator: The Power indicator lights when the LX-18A V2 amplifier has been turned on and has power. 14) Protection: Red LED turns on when distortion is audible in the amplifier output. This indicates that you should turn the amplifier down.
LX-18A V2 DIGITAL AMPLIFIER 8 7 High-Pass External Speaker On Off 4 6 5 1 3 Full-Range Level Protection L L 2 Phase Neutrik Pins: 1 + or 2 + = (+) 1 - or 2 - = (-) R R 0 180 Power 9 Sub-Out Outputs Input B-52 MAD E IN U.S.A. Digital Amplifier LX-18AV2 Designed by ETI Sound Systems / B-52 Pro Audio, Huntington Park, CA Model: LX-18A. May be covered by one or more patents pending.
Connecting Your LX-18A V2 To Active Full-Range Speakers (As well as the LX-18V2 - Passive 18” subwoofer) SP-1515 / ACT-1515 Active Full-Range Speakers HIGH-PASS OUT SP-1515 / ACT-1515 Active Full-Range Speakers B-52 M AD E IN U .S. A B-52 . L B-52 MAD E IN U.S .A. External Speaker On Off Neutrik Pins: 1 + or 2 + = (+) 1 - or 2 - = (-) L Full-Range High-Pass L Sub-Out Outputs Power Input M AD R 0 Phase E IN U.S. A . B-52 MAD Level Protection R R Audio Input E IN U.S. A .
Daisy-chaining your LX-18A V2 to Additional LX-18A V2 Subwoofers (As well as the LX-18V2 - Passive 18” subwoofers) B-52 M AD E IN U. S. A . External Speaker On Off Neutrik Pins: 1 + or 2 + = (+) 1 - or 2 - = (-) L High-Pass Full-Range R R Sub-Out Outputs Power Input B-52 Level Protection L 0 Phase MAD 180 E IN U.S. A . B-52 M AD E I N U . S. A . Digital Amplifier LX-18A Designed by ETI Sound Systems / B-52 Pro Audio, Huntington Park, CA Model: LX-18A.
E.T.I. SOUND SYSTEMS, INC. 3383 Gage Avenue, Huntington Park, CA, 90255 Phone: 323-277-4100 Fax: 323-277-4108 National: 1-800-344-4ETI Internet: www.B-52PRO.com E-mail: info@B-52PRO.
