User's Manual

SFFR-6 User Manual

Configuration

Doc ID: ES1002-UM02-v504

Page 31 of 60

3.4.2 Setting the start-up profile for a Duplexer

To define different start-up profiles for different duplexers use the following steps:

Click on the Duplexer Group Tags menu item on the navigation pane and press the + Add Duplexer Group Tag button on

the content pane to show the Add Duplexer Group Tag form.

The following fields will be required to be completed.

Field Description

Duplexer Group Tag

A unique name for this duplexer group. Allowed characters are A-Z, a-z, 0-9 and '-'. Up to 8 characters can

be entered. The name “All” cannot be used.

Comment (Optional) An optional comment describing this duplexer group tag.

Rx Freq The receive frequency of the duplexer group

Tx Freq The transmit frequency of the duplexer group

Start-up Profile The operational profile to be selected when the GoBox powers on

At least one operational profile is required.

The last active profile (before the GoBox was shut down) takes precedence over the Start-up Profile. However, if

this profile is not compatible with the currently installed duplexer, the Start-up profile will be used..