User's Manual
Table Of Contents
- 1 Introduction
- 2 Getting Started
- 3 Configuration
- 3.1 Before you begin
- 3.2 Connecting to your GoBox configuration interface
- 3.3 Managing Operational Profiles
- 3.4 Managing Duplexers
- 4 Using the GoBox
- 4.1 Turning your GoBox On
- 4.2 Selecting an Operational Profile
- 4.3 Stopping Repeater Operation
- 4.4 Checking GoBox Status
- 4.5 Administration
- 5 Troubleshooting
- 5.1 Cannot connect to the GoBox web interface
- 5.2 Network Status icon displays REG ERR
- 5.3 Network Status icons displays PSWD
- 5.4 Network Status icon WWW does not turn solid
- 5.5 Network Status icon VPN does not turn solid
- 5.6 Network Status icon RNC does not turn solid
- 5.7 Status window displays Err:Ctrl
- 5.8 Status window displays Err:Rad1, Err:Rad2 or Err:Rad12
- 5.9 There are no profiles to select on the GoBox control panel
- 5.10 GoBox web interface displays “Template Syntax Error”
- 5.11 The LEDs and the LCD backlight do not turn on
- 5.12 When turning on the GoBox, the LEDs flash rapidly for a second, and the LCD stays blank
- 6 Glossary
SFFR-6 User Manual
Contents
Doc ID: ES1002-UM02-v508
Copyright © 2021 Etherstack
Page vii
ISED Product Identification
To enable identification of the products within the Radio Equipment Listing (REL) and as per the labelling requirements of
Innovation, Science and Economic Development Canada (ISED). RSS-Gen Issue 5, Table 4 lists the configuration options for
radio transmitters:
• FCC ID: 2ADAKSFFR6V2/IC: 9487A-SFFR6V2
• FCC ID: 2ADAKSFFR6UL2/IC: 9487A-SFFR6UL2
• FCC ID: 2ADAKSFFR6UH2/IC: 9487A-SFFR6UH2
The ISED certification number and Hardware Version Identification Number (HVIN) are labelled on the product. The HVIN
is preceded by “Model” on the label. The Product Marketing Name (PMN) is provided in this document. The PMN is
dependent on the type of “Duplexer Module” fitted to the product. The “Duplexer Module” is a changeable module, and
each “Duplexer Module” can either be fitted with an “Internal Duplexer” or fitted with direct RF connections (“No Internal
Duplexer”). The products are available factory fitted with either a single RF port or fitted with two RF ports.
Permettre l'identification des produits dans la Nomenclature du Matériel Radio (NMR) et conformément aux exigences
d'étiquetage d'Innovation, Sciences et Développement économique Canada (ISDE). CNR-Gen 5e édition, Table 4 répertorie
les options de configuration des émetteurs radio :
• FCC ID : 2ADAKSFFR6V2/IC : 9487A-SFFR6V2
• FCC ID : 2ADAKSFFR6UL2/IC : 9487A-SFFR6UL2
• FCC ID : 2ADAKSFFR6UH2/IC : 9487A-SFFR6UH2
Le numéro d'homologation d'ISDE et le Numéro d’identification de la version du matériel (NIVM) sont étiquetés sur le
produit. Le NIVM est précédé de « Model » sur l'étiquette. Le Nom de marque du produit (NMP) est fourni dans ce
document. Le NMP dépend du type de « module duplexeur » installé sur le produit. Le « module duplexeur » est un module
modifiable, et chaque « module duplexeur » peut être équipé d'un « duplexeur interne » [« Internal Duplexer »] ou équipé
de connexions RF directes (« pas de duplexeur interne » [« No Internal Duplexer »]). Les produits sont disponibles en usine
équipés soit d'un seul port RF, soit de deux ports RF.
RF ports /
Ports RF
Duplexer Module /
Module Duplexeur
HVIN (Model) /
NIVM
PMN /
NMP
Certification Number /
Numéro d’homologation
1
No Internal Duplexer
SFFR6V2
SFFR-6
9487A-SFFR6V2
1
Internal Duplexer
SFFR6V2
SFFR-6-IDX
9487A-SFFR6V2
2
No Internal Duplexer
SFFR6V2
SFFR-6
9487A-SFFR6V2
2
Internal Duplexer
SFFR6V2
SFFR-6-IDX
9487A-SFFR6V2
1
No Internal Duplexer
SFFR6UL2
SFFR-6
9487A-SFFR6UL2
1
Internal Duplexer
SFFR6UL2
SFFR-6-IDX
9487A-SFFR6UL2
2
No Internal Duplexer
SFFR6UL2
SFFR-6
9487A-SFFR6UL2
2
Internal Duplexer
SFFR6UL2
SFFR-6-IDX
9487A-SFFR6UL2
1
No Internal Duplexer
SFFR6UH2
SFFR-6
9487A-SFFR6UH2
1
Internal Duplexer
SFFR6UH2
SFFR-6-IDX
9487A-SFFR6UH2
2
No Internal Duplexer
SFFR6UH2
SFFR-6
9487A-SFFR6UH2
2
Internal Duplexer
SFFR6UH2
SFFR-6-IDX
9487A-SFFR6UH2
Table 4 ISED Product Identification