User's Manual
Table Of Contents
- 1 Introduction
- 2 Getting Started
- 3 Configuration
- 3.1 Before you begin
- 3.2 Connecting to your GoBox configuration interface
- 3.3 Managing Operational Profiles
- 3.4 Managing Duplexers
- 4 Using the GoBox
- 4.1 Turning your GoBox On
- 4.2 Selecting an Operational Profile
- 4.3 Stopping Repeater Operation
- 4.4 Checking GoBox Status
- 4.5 Administration
- 5 Troubleshooting
- 5.1 Cannot connect to the GoBox web interface
- 5.2 Network Status icon displays REG ERR
- 5.3 Network Status icons displays PSWD
- 5.4 Network Status icon WWW does not turn solid
- 5.5 Network Status icon VPN does not turn solid
- 5.6 Network Status icon RNC does not turn solid
- 5.7 Status window displays Err:Ctrl
- 5.8 Status window displays Err:Rad1, Err:Rad2 or Err:Rad12
- 5.9 There are no profiles to select on the GoBox control panel
- 5.10 GoBox web interface displays “Template Syntax Error”
- 5.11 The LEDs and the LCD backlight do not turn on
- 5.12 When turning on the GoBox, the LEDs flash rapidly for a second, and the LCD stays blank
- 6 Glossary
SFFR-6 User Manual
Glossary
Doc ID: ES1002-UM02-v508
Copyright © 2021 Etherstack
Page 59 of 63
Term
Definition
APCO
Association of Public-Safety Communications Officials
AVL
Automatic Vehicle Location
DFSI
Digital Fixed Station Interface
ISSI
Inter Sub-System Interface
MMI
Man Machine Interface
NAC
Network Access Code
OTAR
Over the Air Rekeying
PTT
Push-To-Talk
P25
Project 25
RFSS
Radio Frequency Sub-System
RNC
RFSS Network Controller
SFFR
Small Form Factor Repeater
VPN
Virtual Private Network
WACN
Wide Area Communications Network