User's Manual
Table Of Contents
- 1 Introduction
- 2 Getting Started
- 3 Configuration
- 3.1 Before you begin
- 3.2 Connecting to your GoBox configuration interface
- 3.3 Managing Operational Profiles
- 3.4 Managing Duplexers
- 4 Using the GoBox
- 4.1 Turning your GoBox On
- 4.2 Selecting an Operational Profile
- 4.3 Stopping Repeater Operation
- 4.4 Checking GoBox Status
- 4.5 Administration
- 5 Troubleshooting
- 5.1 Cannot connect to the GoBox web interface
- 5.2 Network Status icon displays REG ERR
- 5.3 Network Status icons displays PSWD
- 5.4 Network Status icon WWW does not turn solid
- 5.5 Network Status icon VPN does not turn solid
- 5.6 Network Status icon RNC does not turn solid
- 5.7 Status window displays Err:Ctrl
- 5.8 Status window displays Err:Rad1, Err:Rad2 or Err:Rad12
- 5.9 There are no profiles to select on the GoBox control panel
- 5.10 GoBox web interface displays “Template Syntax Error”
- 5.11 The LEDs and the LCD backlight do not turn on
- 5.12 When turning on the GoBox, the LEDs flash rapidly for a second, and the LCD stays blank
- 6 Glossary
SFFR-6 User Manual
Using the GoBox
Doc ID: ES1002-UM02-v508
Copyright © 2021 Etherstack
Page 43 of 63
4.5 Administration
4.5.1 Backing up GoBox Configuration Data
To back-up your GoBox configuration to your local computer, click the Backup menu item on the left hand navigation pane
and click on the Download GoBox Profiles button in the content pane.
A specially constructed zip file containing all GoBox profiles will be downloaded to the Download folder of your local
computer. This file should be archived and stored in a safe place.
This configuration file can be used to restore the configuration on any GoBox and/or program future GoBoxes.
4.5.2 Restoring GoBox Configuration Data from a Backup
To restore a GoBox configuration, click the Restore menu item on the left hand navigation pane and click on the Restore
button in the content pane.
A file browser will then be displayed where you can select a previously backed up configuration file.
This will overwrite all profiles and duplexer group tags currently stored on the GoBox.
!