User's Manual
Table Of Contents
- 1 Introduction
- 2 Getting Started
- 3 Configuration
- 3.1 Before you begin
- 3.2 Connecting to your GoBox configuration interface
- 3.3 Managing Operational Profiles
- 3.4 Managing Duplexers
- 4 Using the GoBox
- 4.1 Turning your GoBox On
- 4.2 Selecting an Operational Profile
- 4.3 Stopping Repeater Operation
- 4.4 Checking GoBox Status
- 4.5 Administration
- 5 Troubleshooting
- 5.1 Cannot connect to the GoBox web interface
- 5.2 Network Status icon displays REG ERR
- 5.3 Network Status icons displays PSWD
- 5.4 Network Status icon WWW does not turn solid
- 5.5 Network Status icon VPN does not turn solid
- 5.6 Network Status icon RNC does not turn solid
- 5.7 Status window displays Err:Ctrl
- 5.8 Status window displays Err:Rad1, Err:Rad2 or Err:Rad12
- 5.9 There are no profiles to select on the GoBox control panel
- 5.10 GoBox web interface displays “Template Syntax Error”
- 5.11 The LEDs and the LCD backlight do not turn on
- 5.12 When turning on the GoBox, the LEDs flash rapidly for a second, and the LCD stays blank
- 6 Glossary
SFFR-6 User Manual
Using the GoBox
Doc ID: ES1002-UM02-v508
Copyright © 2021 Etherstack
Page 42 of 63
The active profile status page will show:
Active Profile: The active profile name. This will match what is shown on the GoBox status window.
Status:
Loading whilst the profile is being loaded
Operational once the profile is ready
For network profiles additional status information is available depending upon the type of connection:
RNC: Displays whether or not the GoBox has successfully connected to the RNC.
Not Connected if the GoBox is not connected to the RNC
Registering if the GoBox is attempting to connect to the RNC
Registration Failed if the GoBox can communicate with the RNC but cannot register
Affiliation Failed if the GoBox can communicate with the RNC but cannot affiliate to the network group
Registered if connected and registered with RNC successfully
DFSI: Displays whether or not a DFSI Host has successfully established a connection to the GoBox.
Not Connected if no DFSI Host has connected
Connected if successfully connected to a DFSI Host, along with the DFSI Host IP Address and Host UDP Port.
When the GoBox is used with a VPN to establish a secure connection to a network, additional status information is
available,
Certificate: displays the file name of the VPN client certificate used by the current profile
Status: displays current VPN status which is one of
Disconnected if no VPN can be established
Connecting whilst in the process of trying to connect to the VPN server
Connected once a successful connected has been established
Need Password if the VPN profile requires a password but has not been entered yet
Invalid Password if the VPN profile requires a password but the provided password returned an error
Password: allows the input of VPN password information. If the VPN profile does not require a password this field
is greyed out.
To update the page with the latest information press the Refresh button.
When a profile is active, clicking Stop will deactivate it.
!