User's Manual
Table Of Contents
- 1 Introduction
- 2 Getting Started
- 3 Configuration
- 3.1 Before you begin
- 3.2 Connecting to your GoBox configuration interface
- 3.3 Managing Operational Profiles
- 3.4 Managing Duplexers
- 4 Using the GoBox
- 4.1 Turning your GoBox On
- 4.2 Selecting an Operational Profile
- 4.3 Stopping Repeater Operation
- 4.4 Checking GoBox Status
- 4.5 Administration
- 5 Troubleshooting
- 5.1 Cannot connect to the GoBox web interface
- 5.2 Network Status icon displays REG ERR
- 5.3 Network Status icons displays PSWD
- 5.4 Network Status icon WWW does not turn solid
- 5.5 Network Status icon VPN does not turn solid
- 5.6 Network Status icon RNC does not turn solid
- 5.7 Status window displays Err:Ctrl
- 5.8 Status window displays Err:Rad1, Err:Rad2 or Err:Rad12
- 5.9 There are no profiles to select on the GoBox control panel
- 5.10 GoBox web interface displays “Template Syntax Error”
- 5.11 The LEDs and the LCD backlight do not turn on
- 5.12 When turning on the GoBox, the LEDs flash rapidly for a second, and the LCD stays blank
- 6 Glossary
SFFR-6 User Manual
Using the GoBox
Doc ID: ES1002-UM02-v508
Copyright © 2021 Etherstack
Page 40 of 63
4.4.1.3 Checking the current operational profile
The GoBox will display the current operational mode in the status window after power up.
If the GoBox displays “Standby” in the status window, the GoBox is in programming mode and awaiting a connection from
a laptop or PC otherwise the GoBox will display the current operational profile.
4.4.2 Web configuration interface
4.4.2.1 Checking Battery Status
To access this page, click on the Battery menu item on the navigation pane.
The battery status page will show if a battery is installed, each batteries current charge percentage and if the internal
GoBox battery charger is active.
To update the page with the latest information press the Refresh button.
!
The battery charger will only operate when an AC or DC power source is applied and will automatically turn off to
protect the battery once full charge has been reached.
!