User's Manual
Table Of Contents
- 1 Introduction
- 2 Getting Started
- 3 Configuration
- 3.1 Before you begin
- 3.2 Connecting to your GoBox configuration interface
- 3.3 Managing Operational Profiles
- 3.4 Managing Duplexers
- 4 Using the GoBox
- 4.1 Turning your GoBox On
- 4.2 Selecting an Operational Profile
- 4.3 Stopping Repeater Operation
- 4.4 Checking GoBox Status
- 4.5 Administration
- 5 Troubleshooting
- 5.1 Cannot connect to the GoBox web interface
- 5.2 Network Status icon displays REG ERR
- 5.3 Network Status icons displays PSWD
- 5.4 Network Status icon WWW does not turn solid
- 5.5 Network Status icon VPN does not turn solid
- 5.6 Network Status icon RNC does not turn solid
- 5.7 Status window displays Err:Ctrl
- 5.8 Status window displays Err:Rad1, Err:Rad2 or Err:Rad12
- 5.9 There are no profiles to select on the GoBox control panel
- 5.10 GoBox web interface displays “Template Syntax Error”
- 5.11 The LEDs and the LCD backlight do not turn on
- 5.12 When turning on the GoBox, the LEDs flash rapidly for a second, and the LCD stays blank
- 6 Glossary
SFFR-6 User Manual
Contents
Doc ID: ES1002-UM02-v508
Copyright © 2021 Etherstack
Page iv
5.2 Network Status icon displays REG ERR ...................................................................................................................... 56
5.3 Network Status icons displays PSWD ........................................................................................................................ 56
5.4 Network Status icon WWW does not turn solid ....................................................................................................... 56
5.5 Network Status icon VPN does not turn solid ........................................................................................................... 56
5.6 Network Status icon RNC does not turn solid ........................................................................................................... 56
5.7 Status window displays Err:Ctrl ................................................................................................................................. 56
5.8 Status window displays Err:Rad1, Err:Rad2 or Err:Rad12 ......................................................................................... 56
5.9 There are no profiles to select on the GoBox control panel ..................................................................................... 57
5.10 GoBox web interface displays “Template Syntax Error” ........................................................................................... 57
5.11 The LEDs and the LCD backlight do not turn on ........................................................................................................ 57
5.12 When turning on the GoBox, the LEDs flash rapidly for a second, and the LCD stays blank ..................................... 57
6 Glossary ..................................................................................................................... 58