User's Manual
Table Of Contents
- 1 Introduction
- 2 Getting Started
- 3 Configuration
- 3.1 Before you begin
- 3.2 Connecting to your GoBox configuration interface
- 3.3 Managing Operational Profiles
- 3.4 Managing Duplexers
- 4 Using the GoBox
- 4.1 Turning your GoBox On
- 4.2 Selecting an Operational Profile
- 4.3 Stopping Repeater Operation
- 4.4 Checking GoBox Status
- 4.5 Administration
- 5 Troubleshooting
- 5.1 Cannot connect to the GoBox web interface
- 5.2 Network Status icon displays REG ERR
- 5.3 Network Status icons displays PSWD
- 5.4 Network Status icon WWW does not turn solid
- 5.5 Network Status icon VPN does not turn solid
- 5.6 Network Status icon RNC does not turn solid
- 5.7 Status window displays Err:Ctrl
- 5.8 Status window displays Err:Rad1, Err:Rad2 or Err:Rad12
- 5.9 There are no profiles to select on the GoBox control panel
- 5.10 GoBox web interface displays “Template Syntax Error”
- 5.11 The LEDs and the LCD backlight do not turn on
- 5.12 When turning on the GoBox, the LEDs flash rapidly for a second, and the LCD stays blank
- 6 Glossary
SFFR-6 User Manual
Configuration
Doc ID: ES1002-UM02-v508
Copyright © 2021 Etherstack
Page 31 of 63
3.3.5 Setting the Operational Profile Order
If you have created a large number of profiles, it may be useful to set the order in which they appear on the GoBox control
interface.
To change the display order, select the page All Profiles from the Profiles section of the navigation pane, and click Change
Order.
The stored profiles are initially all shown in the left column, and can be sorted there either in the current order or
alphabetically by name. Move them to the right column in the desired order, using the following operations:
1. Select one or more profiles by clicking and sweeping up and down within either column.
2. Select all profiles in the left column by clicking on Select All.
3. Move selected profiles from the left to the right column by clicking the right-arrow button. The profiles will be
inserted in the new ordering at the cursor (the row with the dashed border).
4. Move the cursor up and down in the right column by clicking on the up-arrow or down-arrow buttons.
5. Move selected profiles from the right column back to the left column by clicking the left-arrow button. The
profiles will be shown according to the selected sorting criterion.
6. Once all profiles are in the right column in the desired order, click Save. Alternatively click Cancel to return to
the profile list without changing the order.