User's Manual
Table Of Contents
- 1 Introduction
- 2 Getting Started
- 3 Configuration
- 3.1 Before you begin
- 3.2 Connecting to your GoBox configuration interface
- 3.3 Managing Operational Profiles
- 3.4 Managing Duplexers
- 4 Using the GoBox
- 4.1 Turning your GoBox On
- 4.2 Selecting an Operational Profile
- 4.3 Stopping Repeater Operation
- 4.4 Checking GoBox Status
- 4.5 Administration
- 5 Troubleshooting
- 5.1 Cannot connect to the GoBox web interface
- 5.2 Network Status icon displays REG ERR
- 5.3 Network Status icons displays PSWD
- 5.4 Network Status icon WWW does not turn solid
- 5.5 Network Status icon VPN does not turn solid
- 5.6 Network Status icon RNC does not turn solid
- 5.7 Status window displays Err:Ctrl
- 5.8 Status window displays Err:Rad1, Err:Rad2 or Err:Rad12
- 5.9 There are no profiles to select on the GoBox control panel
- 5.10 GoBox web interface displays “Template Syntax Error”
- 5.11 The LEDs and the LCD backlight do not turn on
- 5.12 When turning on the GoBox, the LEDs flash rapidly for a second, and the LCD stays blank
- 6 Glossary
SFFR-6 User Manual
Configuration
Doc ID: ES1002-UM02-v508
Copyright © 2021 Etherstack
Page 28 of 63
3.3.3 Adding a Mixed Mode Conventional Repeating Profile
3.3.3.1 Standalone Mixed Mode
To create a new Mixed Mode Standalone Profile, click the Mixed Mode Conventional menu item in the navigation pane
and click on + Add Profile button on the content pane.
The fields required are a combination of both P25 and Analog profiles, enabling both voice formats to be repeated
depending upon the transmitting subscriber unit.
3.3.3.2 Network Mixed Mode
To create a new Mixed Mode Networked Profile, click the Mixed Mode Networked menu item in the navigation pane and
click on + Add Profile button on the content pane.
The fields required are a combination of both P25 and Analog profiles, enabling both voice formats to be repeated locally
and via the network connection.
Once an Analog Networked profile is selected, the IP address of the GoBox Web Interface will change to the new IP
address. To re-connect to the GoBox Web Interface at http://172.16.10.1 turn the rotary dial on the control
interface until “Standby” is displayed in the Status Window.
!