User's Manual

5 6
Installation
Slide the clip into the back of the unit, then
clip the unit on visor of driver side, adjust the
unit to a convenient and easy-control
position.
Operation
First use and install the battery
1.Rotate the screw counter clockwise at the
back of unit, take off the battery door and
place the battery according to the
instruction.
2.Place the battery door and rotate the screw
clockwise to lock the battery door.
3.Clip on the visor
Low Battery Power
When the battery power is too low, the LED
will flicker quickly when used. There will also
be a short beeping sound for every minute.
Change the battery or use external power.
Power ON/OFF
Power ON again when the unit was auto-off.
Initial pairing/connecting
-Turn on the Bluetooth function of pairing
device you want to connect and then search
the speaker phone. When your device
displays CS800 , press pair button, then
input the passcode 0000 . The unit will
auto-connect with your device. The blue
LED will flash when it is in pairing mode.
Once connection is successful, blue LED
will flash slowly.
-If the pairing/connection fail, the LED will
become stable blue and the unit will turn off
automatically in 3 minutes
Switch power switch to ON or OFF position.
""
""
R