Unit installation
Table Of Contents
HINTS FOR USING REMOTE CONTROLS
FOR SAFETY AND ENERGY SAVINGS
1.
Set the MAIN CONTROL to 42°C for normal household use and to prevent small children
from scalding.
2.
For the dishwasher set the MAIN CONTROL to 60°C or the temperature in the manufacturer's
instructions.
3.
For showering use settings between 37°C-39°C and no cold water will be needed to be mixed,
and if other hot or cold water taps are used the temperature will be maintained.
THE TEMPERATURE WILL INCREASE BY 1°C WITH EACH
PRESS OF THE UP/DOWN BUTTONS. THE TEMPERATURE
CAN BE ADJUSTED CONTINUOUSLY BY KEEPING
THE BUTTON PRESSED. OVER 50°C UP TO 75°C,
THE TEMPERATURE IS CONTROLLED BY 5-°C NOTCH.
PLEASE NOTE ABOVE 50°C SCALDING CAN OCCUR WITHIN SECONDS
4.
The MAIN REMOTE CONTROL is left switched on at all times for operation.
5.
The MAIN REMOTE CONTROL is left switched on at all times and then change can be made
to the operation temperature at any time during operation of hot water taps.
17