Datasheet

Page 5 of 36
III. General Lock Spec
This page shows the similar specifications of the Eternity 4 and Eternity 5.
Keypad: 12 all weather numeric keypad
Keypad Functions: Permanent codes, Temporary codes, one-time service codes
Power Supply: 4 standard AA batteries with a weatherized battery pack for all weather conditions
Power Supply Life Expectancy: 10,000 operations, low battery warning when system drops below 4.8 volts
Memory Retention: Flash memory never looses memory even without power
Programming / Communication Method: iButton key-fob, no annoying wires
Functions: Time zones for lock function (automatically unlock or lock), fully programmable exception dates (holidays),
temporary dates, and time zones for iButton key-fobs.
Finishes: Stainless, or Brass.
Handles: Reversible Lever
Audit Trail: 4000-event audit trail.
iButton Users: 500
Temporary Codes: No limit
Permanent Codes: 300
One Time service code: 10
Anti-tamper: Red-warming light stays on for 60 seconds after 3 consecutive invalid code entries
Key Bypass: Standard on all units
Door Preparation: Standard ANSI A115 Series Prep, optional by adding additional 5/8” through-bolt holes to add
stability to the lock and increase security.
Strike Plate: ANSI Standard 115.3. Square corner, 1-1/8 x 2-3/4 inch T strike with 1-1/4 lip-to-center dimension.
Latch: 2 3/4 inch backset standard (2 3/8 inch backset optional), solid brass with 1/2-inch throw 1-inch diameter bore is
required.
Materials: Zinc Alloy
Temperature: 0°F-120°F (-18°C-50°C)
Exposure: All weather conditions
Accessibility Standard: Meets ADA standards Americans with disabilities act.
Lock Back Time: 1 – 25 seconds (default is 5 seconds)
Working Voltage: 4.8-6.4V
Low Battery Warning: 4.8V or lower
Door Thickness: 1 3/8" to 2"
Keyway: Schlage C 6