Datasheet

Page 13 of 36

Eternity-V-Mortise-Installation

Step 2

Insert the square shaft (A) into the center hub (B). (Fig 1)

Insert the position pin into the hole on the center hub to

secure the square shaft. Bend the end of position pin

around the center hub to secure the pin in place. (Fig 2)

Fig 2

Fig 1

Enlarged

Fig 1

Step 3

Screw in and tighten the two fastener extensions (C)

into the front lock fastener posts, located on both side

of the center hub. Attach and tighten the upper

fastener extension (D) (Fig 3) Note: The upper

fastener extension (D) is optional.

Fig 3

D (optional)

Step 4

Place the front lock housing onto the door, with

the rubber gasket (E) between the door and

lock housing. Feed the power plug (F) through

the hole (Fig 4).

Fig 4

Step 1

Insert the lock case into mortise

pocket. Secure the lock case with

two screws.