Mini60 Spot - 60 Watt LED Moving Head With 3 Facet Prism support@EternalLighting.
Table of contents 1. Before you begin 2 1.1 Packing list 2 1.2 Unpacking instructions 2 1.3 AC Power 2 1.4 Safety instructions 2 2. Introduction 2.1 Description of the fixture 3 3 2.2 Features 3 2.3 DMX channel 4 3. Setup 4 3.1 Fuse replacement 4 3.2 Fixture linking 4 Data cabling 5 DMX data cable 5 3.3 3-Pin to 5-Pin conversion chart 5 3.4 Setting up a DMX serial data link 5 3.5 Master/Slave fixture linking 6 3.6 orientation 6 4. Operating instructions 6 4.
1. Before you begin 1.1 Packing list Product name Mini moving head light Signal cable Power -line quantity 1 pcs 1 base 1 base 1.2 Unpacking instructions Immediately upon receriving a fixture, carefully unpack the carton, check the contents to enrure that all parts are present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shous sings of mishandling.
20in(50cm) from adjacent surfaces. Be sure that no ventilation slots are blocked. Always disconnect from poer source before servicing or replacing fuse and be sure to repalce with same fuse size and type. Secure fixture to fastening device using a safety chain. Never carry the fixture solely by its heda. Use its carrying handles. Maximum ambient temperature (Ta) is 104T (40°C ). Do not operate fixture at temperatures higher than this.
Strobe Variable electronic strobe. Control Auto-running,Master/slave mode,DMX. LED display LED display menu with invert. Pan/Tilt Pan 630°,Tilt 240°,Pan /Tilt speed from fast to slow. Reset Yes Fan cool Yes 2.
Data cabling To link fixtures together you must obtain data cables. If you choose to craete your own cable pleae use data-grade cables that can carry a high quality signal and are less prone to electromagnetic interference. DMX data cable Use a belden 9841 or equivalent cable which meets the specifications for EIA RS-485 applications. Standard microphone cables cannot transmit DMX datat reliably over long distances. The cable will have the following characterstics: 2-conductor twisted pair plus a shield.
This mode allows the until to be controlled by any universal DMX controller. The default mode for the fixture is DMX, as follow. 4.
1-225 Speed from fast to slow 9 11 10 0-225 Pan fine 16bit 10 12 11 0-255 Tilt fine 16bit 11 13 12 0-149 150-200 No reset(delay 3 second) - - 8 0-12 13-225 No Prism - 3 - 0 1-255 No Focus 0-255 0-100% 0-255 0-100% 0 - 255 0 - 100% Pan fine Tilt fine Reset Prism Focus _ 7 8 _ 9 Red _ Green - _ Blue 5.
We'. The manufacture reserves the product upgrades, updates power.
