CUBE4™ RGBW QUAD LED User Manual (Battery Powered DMX LED Fixture) Please read over this manual before operating the light.
FIRST CHARGE YOUR FIXTURE FOR 6 HOURS. Introduction Unpacking: Thank you for purchasing the CUBE4™ RGBW QUAD LED. Every CUBE4™ RGBW QUAD LED has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your fixture for any damage and be sure all accessories necessary to operate the unit has arrived intact.
Safety Precautions ● To reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture. ● Do not spill water or other liquids into or on to your unit. ● Be sure that the local power outlet match that of the required voltage for your unit. ● Do not attempt to operate this unit if the power cord has been frayed or broken. Do not attempt to remove or break off the ground prong from the electrical cord.
attempting to operate you fixture. DMX Linking: To ensure proper DMX data transmission, when using several DMX fixtures try to use the shortest cable path possible. The order in which fixtures are connected in a DMX line does not influence the DMX addressing. For example; a fixture assigned a DMX address of 1 may be placed anywhere in a DMX line, at the beginning, at the end, or anywhere in the middle.
DMX Values and Functions 4CH Mode Value Description CH1 0-255 RED dimmer (0-255) CH2 0-255 GREEN dimmer (0-255) CH3 0-255 BLUE dimmer (0-255) CH4 0-255 WHITE dimmer (0-255) 8CH Mode Value Description CH1 0-255 RED dimmer (0-255) CH2 0-255 GREEN dimmer (0-255) CH3 0-255 BLUE dimmer (0-255) CH4 0-255 WHITE dimmer (0-255) CH5 0-255 R, G, B, W dimmer (0-255) CH6 0-255 Auto Slow to Fast (0-255) CH7 CH8 0-255 0-255 R, G, B, W STROBE from slow to fast (0-255) SOUND (Off 0-15 ON
LED Operation Menu: After initialization, the unit is ready for setting and working. Please see the following table for setting information. Display Function ADDR DMX Address（0-512） CHMD 4CH/8CH SLND SHND NAST Master SLAL Slave SOND Sound control COLO Color choose 1-15 Auto operation FADE Running Speed (SP1-SP8) NANU Red (0-255) Green (0-255) Blue（0-255） White（0-255） TEST Quality Control For Battery Function and Charge The unit has the function of battery powered.
(1) Alpha-numeric display (2) Touch switches (3) Microphone (4) DMX-In socket (5) DMX-Out socket (6) Power switch (7) Battery switch (8) GND (9) Power socket and fuse holder (10) Fixation screw (11) Mounting bracket There are two buttons on the rear panel of the lighting. One is for power, and the other is for battery. ● ● ● When use the fixture with DMX, not battery, please switch the button for power to “on”, and switch the button for battery to “bat off”.
For wireless receiver Wireless Module of DMX512 MODE：PCB-WI-DMX Brief： DMX512 wireless receiver/transmitter transmits standard DMX512 protocol data (generated by console )by wireless way, which solves lighting control issues of wireless transmitting completely between console and lighting, lighting and lighting and so on, It get rid of connecting cable limited completely And also can ensure without any time delay when signal data is transmitting, signal data is real time and reliably.
(1) Antenna (3) Wireless indicator (2)Power switch for wireless receiver (4)ID code selector Product feature: 1. Product name：2.4G wireless DMX512 R/T molding board 2. Small size，Easy to suit for interior of accessed lighting 3. Single key to operate，tricolor LED displaying 4. Transmitting standard DMX512 protocol data of console，also can transmitting lighting and lighting DMX512 protocol data. 5. 126 channels jumping frequency automatically ，high anti-jamming ability.
Compatible series product as follows: Wiresless transmitter Operating manual： 1. 2. ID code and LED color corresponding relationship： 1：RED 2：GREEN 3：RED+GREED 4：BLUE 5：RED+BLUE 6：GREEN+BLUE 7：RED+GREED+BLUE Press button on transmitter to select group to match corresponding color on the receiving fixture. 3. LED constant lit up：no DMX or wireless signal. Red LED flash：transmitting. Green LED flash：receiving RF frequency- - - - - - - - - - - - 2. 400-2.
use different ID value if you need use more than 1 group wireless net at same time in same place. 3. The red LED flashes when transmitter transmits DMX data by no interfered frequency section, then receiver changes communicated frequency section. Green LED flash till received corrected same ID value, LED flash more fast once DMX data more fast. 4.
LED: 10pcs (4in1) Net Weight: 7lbs Dimensions: 8 inches x 8 inches x 6 inches Note: All information is subject to change without prior notice.
