User manual

5
CH7
0-255
R, G, B, A STROBE from slow to fast (0-255)
CH8
0-255
SOUND (Off 0-15 ON 16-255)
LED Operation Menu:
Touch Buttons
There are four touch buttons under the LED Alpha-numerical display: Menu, Down, Up, Enter.
Normally, the LED will display the current DMX address code of the fixture. At this time, presses
Menu to choose the function you want to set up. Press and hold Up or Down to fast scrolling
within the menu options. When an options flashing the LED display, press Enter to confirm and
Menu to exit.
After initialization, the unit is ready for setting and working. Please see the following table for
setting information
.
Display
Function
ADDR
DMX Address（0-512）
CHMD
4CH/8CH
SLND
NAST
Master
SLAL
Slave
SHND
SOND
Sound control
COLO
Color choose 1-15
Auto operation
FADE
Running Speed (SP1-SP8)
NANU
Red (0-255)
Green (0-255)
Blue（0-255）
Amber（0-255）
TEST
Quality Control
FHRS
Operating Hours
For Battery Function and Charge
The unit has the function of battery powered. The button for battery and charge is set on the
rear panel. It is showed as the following picture, and the function is described as below.