User manual

4
 Auto Mode - The unit will automatically chase through the different patterns.
 DMX control mode - This function will allow you to control the lighting with a standard DMX
512 controller.
 Battery powered – This function will allow you to control the lighting independently without
any DMX cable
DMX Mode: Operating through a DMX controller give the user the freedom to create their own
programs tailored to their own individual needs. This function also allows you to use your
fixtures as pattern changing lights.
1. This function will allow you to control each individual fixture‟s traits with a standard DMX 512
controller.
2. The CUBE™ RGBA uses 6 DMX channels to operate. Please see “DMX Values and
Functions” for the DMX traits.
3. To run your fixture in DMX mode, plug in the fixture via the XLR connections to any standard
DMX controller. Set your desired DMX address following the setup specifications that come
with your DMX controller.
4. The unit can automatically recognize the DMX signal once the DMX connection is done.
DMX Linking: To ensure proper DMX data transmission, when using several DMX fixtures try
to use the shortest cable path possible. The order in which fixtures are connected in a DMX line
does not influence the DMX addressing. For example; a fixture assigned a DMX address of 1
may be placed anywhere in a DMX line, at the beginning, at the end, or anywhere in the middle.
When a fixture is assigned a DMX address of 1, the DMX controller knows to send DATA
assigned to address 1 to that unit, no matter where it is located in the DMX chain.
DMX Values and Functions
4CH Mode
8CH Mode
Value
RGBA 10mm 198
CH1
0-255
RED dimmer (0-255)
CH2
0-255
GREEN dimmer (0-255)
CH3
0-255
BLUE dimmer (0-255)
CH4
0-255
AMBER dimmer (0-255)
CH5
0-255
R, G, B, A dimmer (0-255)
CH6
0-255
Auto Slow to Fast (0-255)
Value
RGBA 10mm 198
CH1
0-255
RED dimmer (0-255)
CH2
0-255
GREEN dimmer (0-255)
CH3
0-255
BLUE dimmer (0-255)
CH4
0-255
AMBER dimmer (0-255)