Specifications

.LED indicating status

• Matching status: red and blue light flash

• Connected state: blue light is always on

• Musical status: blue lights flash slowly

• Charging state: the red light will be on long

• Charging completed: red light off

• Low power: there is a beep

(2). Button function operation

• Power on: long press the power button 2S

• Shutdown: Long press the power button 2S in the power-on state

• PLAY/pause: Short press PLAY to pause the music.

• Last song and next song: Long press + button to control the next song and - button to

control the next song.

• Volume :: Press + and - to control the volume.

• Call button: Double click the PLAY button to dial the first call record, press to answer the

short call, and press to reject the long call.

• Disconnect bluetooth: Press + and - keys for 3 seconds to disconnect bluetooth

(3) Operation specifications

• 1. Please keep the distance between bluetooth speaker and mobile phone (or other

connected devices) within 1 meter, the closer the better

• 2. Long press 2S to start the device, the red and blue light will flash, then enter the

pairing state, waiting for connection;

• 3. Turn on the Bluetooth function of the user's mobile phone (or other Bluetooth devices)

and search or scan. At this time, the mobile phone will search all nearby Bluetooth

devices.At this point you can make phone calls and listen to music.

• 4. When the battery is less than 30%, there will be a low power prompt, reminding users

to pay attention to charging.

Ｅ－ＢＳ－１９５７２

PAGE 1
Ｅ－ＢＳ－１９５７２ .LED indicating status • Matching status: red and blue light flash • Connected state: blue light is always on • Musical status: blue lights flash slowly • Charging state: the red light will be on long • Charging completed: red light off • Low power: there is a beep (2). Button function operation • Power on: long press the power button 2S • Shutdown: Long press the power button 2S in the power-on state • PLAY/pause: Short press PLAY to pause the music.
PAGE 2
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.