User manual

The following screen will pop-up when clicking the Update Gateway button. Click Browse… button to locate
the configuration file or update image file from your computer's hard drive then click Update Gateway. After
the configuration file upgrade process, click Restart Gateway to activate your previous setting.
 Select a File: Click on the Browse… button to locate the configuration file from your computer's
hard drive.
 Update Gateway: Click the Update Gateway button to upgrade your configuration file.
 Restart Gateway: Click Restart Gateway after the upgrade process to activate your setting.
Note: When uploading Firmware/Configuration File to the 4 Ports ADSL2/2+ Router, it is important not
to interrupt the Web browser by closing the window, clicking a link, or loading a new page. If the browser
is interrupted, it may corrupt the upgrading process. When the upload is complete, your 4 Ports
ADSL2/2+ Router will automatically reboot and restart. The upgrade process will typically take about
1~2 minutes.
4 Ports ADSL2/2+ Router 89