User manual

4 Ports ADSL2/2+ Router 88
4.5.4 TOOLS - Update Gateway
Update Gateway: Firmware is the software that controls the 4 Ports ADSL2/2+ Router and also provides the
user interface that is subject of this manual. The Firmware resides in the 4 Ports ADSL2/2+ Router internal
Flash memory; currently loaded firmware version can be found under STATUS Æ Product Information.
Note: It is recommends that you back up your configuration before doing a firmware upgrade. After the
upgrade is complete, you may need to restore your configuration settings.
To access Firmware Updates, click on TOOLS Æ Update Gateway. The following window screen will
pop-up.
 Select a File: Click on the Browse… button to locate the Firmware or update image file from your
computer's hard drive.
 Update Gateway: Click the Update Gateway button to upgrade your 4 Ports ADSL2/2+ Router.
The system will be restarted automatically after the Firmware/Image is successfully uploaded. You
will need to reconnect again to configure your setup.
 Get Configuration: You may download your configuration file from the system by clicking Get
Configuration. Follow the instruction and save your configuration file in your hard drive.