User manual

4 Ports ADSL2/2+ Router 83
4.5 TOOLS
TOOLS: The TOOLS page allows you to save the configuration, restart the device, update the
firmware/image code, setup user and remote log information and run ping/test of the 4 Ports ADSL2/2+
Router.
 System Commands: Save the current configuration, restart the 4 Ports ADSL2/2+ Router and
restore to factory defaults setting.
 Remote Log: Setup Remote Log Information.
 User Management: Configure user name and password.
 Update Gateway: Upgrade the 4 Ports ADSL2/2+ Router firmware.
 Ping Test: Run a ping test.
 Modem Test: Check whether the modem with a specific connection is properly connected to the
network.
 Save All: Click Save All to complete and permanently save the setting.