User manual

 Custom IP Filters: Custom IP Filters allow you to specify individual rules that will deny traffic by
defining the following:
; Source IP address or Source IP Subnet Mask.
; Destination IP address or Destination IP Subnet Mask.
; Port or Port range.
; Protocol.
Customer IP Filter is different from Port forwards, or Block All traffic because they allow greater
scopes of IP addresses to be included in the block.
 Apply: Click the Apply button to confirm your setting.
 Cancel: Click Cancel to ignore all the changes.
 Save All: To complete and save the setting, click Save All after clicking the Apply button.
4 Ports ADSL2/2+ Router 72