User manual

4 Ports ADSL2/2+ Router 58
 Enable DHCP Relay: Click the radio button to enable the DHCP Relay.
; Relay IP: This is the IP Address given by the ISP.
 Server and Relay Off: Click the radio button to enable.
Caution: If the Server and Relay Off function is selected, careful attention must be paid to the IP
Address setup of each computer on the LAN. IP Addresses will no longer be allocated automatically.
 Apply: Click Apply to complete and save the connection profile.
 Cancel: Click Cancel to ignore all the changes.
 Save All: To complete and save the setting, click Save All after clicking the Apply button.