User manual

STEP 2. Click “Apply” after setup. Following windows will pop-up.
The device’s system will save and activate your setting after clicking the “Apply” button. The following
windows will pop up after the reboot process.
 Check the following items when the above window pop-up.
; Name: Show the ISP name selected in STEP 1.
; Type: Show the Encapsulation type selected in STEP 1.
; Username: Show the Username manually entered in STEP 1.
; Password: Show the Password manually entered in STEP 1.
; VPI: Show the VPI setting as shown in STEP 1.
; VCI: Show the VCI setting as shown in STEP 1.
 A Connection Profile (Normally show the ISP Name) will be added to the left side of the
configuration frame under WAN Setup.
4 Ports ADSL2/2+ Router 31