User manual

Chapter 4 Device Administration
For your convenience, an Administrative Utility has been programmed into 4 Ports ADSL2/2+ Router. This
chapter will explain all the functions in this utility. All the 4 Ports ADSL2/2+ Router based administrative tasks
are performed through this web utility.
4.1 Login
To access the 4 Ports ADSL2/2+ Router Configuration screens, follow the following steps will enable you to
log into the 4 Ports ADSL2/2+ Router:
1. Launch the Web browser (Internet Explorer, Netscape, etc).
2. Enter the 4 Ports ADSL2/2+ Router default IP address (Default Gateway)
http://192.168.1.1 in the
address bar then press Enter to Log in.
3. Entry of the username and password will be prompted. Enter the default login “Username” and
“Password”: The default login Username of the administrator is “Admin”, and the default login
Password is “Admin”.
 Note that the Username and Password are case sensitive.
“Username” and “Password” can be changed after login. Refer to the Tools configuration
section for further instruction.
4 Ports ADSL2/2+ Router 21