User manual

4 Ports ADSL2/2+ Router 112
4. Failed to configure the 4 Ports ADSL2/2+ Router through web browser ( By a client PC in
LAN )
Ans. Check the following:
1. Check the hardware connection of the 4 Ports ADSL2/2+ Router’s LAN port. The LED will lit
when a proper connection is made.
2. Check your Windows TCP/IP setting (Refer to Chapter 3 for setting details).
3. Open the Windows System Command Prompt:
 For Windows 9x/ME: Manually enter winipcfg, then press Enter.
 For Windows 2000/XP: Manually enter ipconfig/all, then press Enter.
4. You should have the following information listed on your Window System:
 IP Address: 192.168.1.x
 Submask: 255.255.255.0
 Default Gateway IP: 192.168.1.1
5. I forgot or lost my Administrator Password.
Ans. Reset the 4 Ports ADSL2/2+ Router to factory default by pressing the “Reset” button for 10
seconds.
If you are still getting prompted for a password when saving settings:
1. Access the Router’s web interface by going to http://192.1681.1.
2. Enter the default “username” and “password” then click “Enter” to log in.
3. Click on “TOOLS” then click “User Management”.
4. Enter a new “Password” and new “Username” in the “Username” and “Password” field,
and enter the same password in the second field to confirm the password.
5. Click “Apply” after your setting.
6. I need to upgrade the Firmware.
Ans. In order to upgrade the Firmware with the latest features, go to the PTI’s website and download
the latest Firmware at
www.paradigm.com.tw. Before proceed the upgrading process, check the
following details:
1. Download the latest Firmware and save at your pointed location.
2. Read the firmware release note carefully before proceed the upgrading process.
3. Refer to TOOLS → Update Gateway section for the upgrading process.