User manual

4 Ports 11g Wireless ADSL2/2+ Router 2
1.1 Features
 The 4 Ports 11g Wireless ADSL2/2+ Router provides the following features:
y Compliant to ANSI T1.413 Issue 2, ITU-T G.992.1, ITU-T G.992.2, ITU-G.992.3, ITU G.992.5
and READSL2 standards.Support all Digital Loop ITU G.992.3 annex I and J
specifications.Fully compliant with Annex A/B/B (U-R2) ADSL specifications.
y Downstream and Upstream data rates up to 24Mbps and 1Mbps.
y Support g+ WLAN features with transmission rate up to 125Mbps (Optional).
y IEEE 802.11g WLAN supports up to 54Mbps transmission rate.Support WEP, 802.1X and
WPA based Encryption. Support RFC 1483 Bridge/Routing over ATM over ADSL.
y Support PPPoE, PPPoA and IPoA Routing ATM over ADSL.
y ATM Layer with Traffic Shaping QoS support ( UBR, CBR, VBR-rt, VBR-nt ).
y Support UPnP functionality.
y Web-based setup for installation and management.
y Built-in 4*10/100 Mbps Fast Ethernet Switch port for LAN connection.
y Compliant with IEEE 802.3/802.3u and auto-negotiation.
y Support full-duplex 802.3 flow control.
y Support IP Filtering, MAC Filtering, Web Filtering and IPSec Pass-Through security
functionality.
y Support Dying Gasp functionality.
y Flash memory for firmware upgrade.
y Hardware Reset button for fast default setting recovery.
y HTTP Web-Based Management/Configuration.
y LEDs indicator indicates connection status.
 ADSL Standards
y Full rate ANSI T1.413 Issue2, ITU-T G.992.1 and ITU-T G.992.2 standards compliant.
y ITU G.992.3, ITU G.992.5 and READSL2 ADSL2/2+ standards compliant.
y Downstream and Upstream data rates up to 24Mbps and 1Mbps.
y Reach length up to 22Kft.
y Support Dying Gasp functionality.