User manual

4 Ports 11g Wireless ADSL2/2+ Router 28
1. Static (Fixed IP by ISP): Click the radio button to enable Static (Fixed IP by ISP) option,
then click “Next”, the following window will pop-up:
 Set Static IP: Static IP Settings are for users who have a Static IP Address ( WAN side ) from their
ISP.
; “IP Address”: This is the static IP Address given by the ISP.
Range for IP Address is x.x.x.y, where 0 x 255 and 1 y 254.
≦≦ ≦≦
; “Mask”: This is the subnet mask provided by the ISP.
Range for Subnet Mask is x.x.x.x, where 0 x 255
≦≦ .
; “Default Gateway”: This is your gateway IP address.
Range for Gateway is x.x.x.y, where 0 x 255 and 1 y 254.
≦≦ ≦≦
; “DNS”: This is the DNS address specify by the user or ISP. Check your ISP for setting
detail.
Range for DNS Address is x.x.x.y, where 0 x 255 and 1 y 254.
≦≦ ≦≦
 Click “Apply” after your setting.