User manual

4 Ports 11g Wireless ADSL2/2+ Router 20
C. Windows XP:
1. Click “Start” and “Run”.
2. In the open field, enter “cmd” then click “OK”.
3. In the command prompt, type “ipconfig /all”, then press “Enter”
All the Ethernet adapter information will be shown in the appear Windows. Check if you can
get the following setting:
 IP address as 192.168.1.x
 The Subnet Mask as 255.255.255.0
 the default gateway as 192.168.1.1
4. Type “Exit” to end up the process.